Jekyll & Hyde (itch) Mac OS

broken image


New Apps Land published the Dr.Jekyll and Mr.Hyde. App for Android operating system mobile devices, but it is possible to download and install Dr.Jekyll and Mr.Hyde. For PC or Computer with operating systems such as Windows 7, 8, 8.1, 10 and Mac. Jekyll is not a modern adaptation or reinterpretation of The Strange Case of Dr Jekyll and Mr Hyde. It is a sequel, taking place in the same world, but in the present day, and James Nesbitt is superb in the lead roles. Jekyll & Hyde - Heavenly Creatures (1998) 423.69MB Mac OS X 10.6 Leopard Install DVD - full iso image2018 22.37MB Mac OS X 10.7 (11a494) Lion Install DVD - full iso image 19.57MB.

Jekyll, a simple, blog-aware, static site generator, is very easy to set up on Mac OS X or Linux. On Windows, not so much. This site is here to help.

Please note: Using Jekyll on Windows is not officially supported by the Jekyll team. And while this guide is featured on the Jekyll website, it remains unofficial.

Click the big button below to get started and go through the installation process step by step or select a specific step from the sidebar on the left.

Versions

If you follow this guide step by step, you'll end up with the following software versions. These have been tested and work with Jekyll on Windows.

Versions that have been successfully tested in the past are also listed in the third column. It is generally encouraged to keep your Gems updated (up to the versions indicated below) by regularly running gem update && gem cleanup.

Software (package)VersionAlso tested
Ruby2.0.0p5762.0.0p481
Jekyll2.5.12.4.0 2.3.0 2.2.0 2.1.1 2.1.0
listen2.7.11N/A
wdm0.1.0N/A
If you use Pygments for syntax highlighting:
pygments.rb0.6.0N/A
Python2.7.8N/A
pip1.5.6N/A
setuptools5.4.1N/A
Pygments1.6N/A
If you use Rouge for syntax highlighting:
Rouge1.7.31.7.2 1.6.2 1.6.1 1.5.1 1.4.0

Portable Jekyll

@madhur has created Portable Jekyll. Refer to the project's documentation for more information on how to install and use it. Please note that Portable Jekyll may not always be up to date with the latest version of Jekyll out of the box.

Copyright © 2015 Julian Thilo, licensed under CC-BY-3.0.

Simple • Static • Blog-aware

by Tom Preston-Werner, Nick Quaranto, Parker Moore, et al

Contents
  • Getting Started
    • Installation
    • Troubleshooting
    • Jekyll on Windows

Preface

Note: The book edition is still an early release and a work-in-progess.

This is the (official) documentation for the Jekyll static site builder / generator reformatted in a single-page book edition.

See the source repo for how the book gets auto-built with 'plain' Jekyll - of course - and hosted on GitHub Pages.

Questions? Comments? Send them to the Jekyll Talk forum post titled Jekyll Docu Reformatted as a Single-Page in Black 'n' White (Book Version) - Why? Why Not?.

Onwards.

Acknowledgments

Thanks to all Jekyll contributors for making it all possible.

Getting Jekyll installed and ready-to-go should only take a few minutes.If it ever becomes a pain, please file an issue(or submit a pull request) describing the issue youencountered and how we might make the process easier

Requirements

Installing Jekyll is easy and straight-forward, but there are a fewrequirements you'll need to make sure your system has before you start.

  • Ruby (including developmentheaders, v1.9.3 or above for Jekyll 2 and v2 or above for Jekyll 3)
  • Linux, Unix, or Mac OS X
  • NodeJS, or another JavaScript runtime (Jekyll 2 andearlier, for CoffeeScript support).
  • Python 2.7 (for Jekyll 2 and earlier)
Running Jekyll on Windows

While Windows is not officially supported, it is possible to get it running on Windows. Special instructions can be found on our Windows-specific docs page.

Install with RubyGems

The best way to install Jekyll is viaRubyGems. At the terminal prompt,simply run the following command to install Jekyll:

All of Jekyll's gem dependencies are automatically installed by the abovecommand, so you won't have to worry about them at all. If you have problemsinstalling Jekyll, check out the troubleshooting page orreport an issue so the Jekyllcommunity can improve the experience for everyone.

Jekyll & Hyde (itch) Mac OS
Installing Xcode Command-Line Tools

If you run into issues installing Jekyll's dependencies which make use of native extensions and are using Mac OS X, you will need to install Xcode and the Command-Line Tools it ships with. Download in Preferences → Downloads → Components.

Pre-releases

In order to install a pre-release, make sure you have all the requirementsinstalled properly and run:

This will install the latest pre-release. If you want a particular pre-release,use the -v switch to indicate the version you'd like to install:

If you'd like to install a development version of Jekyll, the process is a bitmore involved. This gives you the advantage of having the latest and greatest,but may be unstable.

Optional Extras

There are a number of (optional) extra features that Jekyll supports that youmay want to install, depending on how you plan to use Jekyll. These extrasinclude LaTeX support, and the use of alternative content rendering engines.Check out the extras page for more information.

ProTip™: Enable Syntax Highlighting

Jekyll Island

If you're the kind of person who is using Jekyll, then chances are you'll want to enable syntax highlighting using Pygments or Rouge. You should really check out how to do that before you go any farther.

Now that you've got everything installed, let's get to work!

If you ever run into problems installing or using Jekyll, here are a few tipsthat might be of help. If the problem you're experiencing isn't covered below,please check out our other help resources as well.

Installation Problems

If you encounter errors during gem installation, you may need to installthe header files for compiling extension modules for Ruby 2.0.0. Thiscan be done on Ubuntu or Debian by running:

On Red Hat, CentOS, and Fedora systems you can do this by running:

On NearlyFreeSpeech you need to run thefollowing commands before installing Jekyll:

To install RubyGems on Gentoo:

On Windows, you may need to install RubyInstallerDevKit.

On Mac OS X, you may need to update RubyGems (using sudo only if necessary):

If you still have issues, you can download and install new Command LineTools (such as gcc) using the command

which may allow you to install native gems using this command (again usingsudo only if necessary):

Note that upgrading Mac OS X does not automatically upgrade Xcode itself(that can be done separately via the App Store), and having an out-of-dateXcode.app can interfere with the command line tools downloaded above. Ifyou run into this issue, upgrade Xcode and install the upgraded CommandLine Tools.

Jekyll & Mac OS X 10.11

With the introduction of System Integrity Protection, several directoriesthat were previously writable are now considered system locations and are nolonger available. Given these changes, there are a couple of simple ways to getup and running. One option is to change the location where the gem will beinstalled (again using sudo only if necessary):

Alternatively, Homebrew can be installed and used to set up Ruby. This can bedone as follows:

Once Homebrew is installed, the second step is easy:

Advanced users (with more complex needs) may find it helpful to choose one of anumber of Ruby version managers (RVM, rbenv, chruby, etc.) inwhich to install Jekyll.

Jackyl Band

If you elect to use one of the above methods to install Ruby, it might benecessary to modify your $PATH variable using the following command:

Jekyll & Hyde (itch) Mac Os Update

GUI apps can modify the $PATH as follows:

Jekyll & hyde (itch) mac os download
Installing Xcode Command-Line Tools

If you run into issues installing Jekyll's dependencies which make use of native extensions and are using Mac OS X, you will need to install Xcode and the Command-Line Tools it ships with. Download in Preferences → Downloads → Components.

Pre-releases

In order to install a pre-release, make sure you have all the requirementsinstalled properly and run:

This will install the latest pre-release. If you want a particular pre-release,use the -v switch to indicate the version you'd like to install:

If you'd like to install a development version of Jekyll, the process is a bitmore involved. This gives you the advantage of having the latest and greatest,but may be unstable.

Optional Extras

There are a number of (optional) extra features that Jekyll supports that youmay want to install, depending on how you plan to use Jekyll. These extrasinclude LaTeX support, and the use of alternative content rendering engines.Check out the extras page for more information.

ProTip™: Enable Syntax Highlighting

Jekyll Island

If you're the kind of person who is using Jekyll, then chances are you'll want to enable syntax highlighting using Pygments or Rouge. You should really check out how to do that before you go any farther.

Now that you've got everything installed, let's get to work!

If you ever run into problems installing or using Jekyll, here are a few tipsthat might be of help. If the problem you're experiencing isn't covered below,please check out our other help resources as well.

Installation Problems

If you encounter errors during gem installation, you may need to installthe header files for compiling extension modules for Ruby 2.0.0. Thiscan be done on Ubuntu or Debian by running:

On Red Hat, CentOS, and Fedora systems you can do this by running:

On NearlyFreeSpeech you need to run thefollowing commands before installing Jekyll:

To install RubyGems on Gentoo:

On Windows, you may need to install RubyInstallerDevKit.

On Mac OS X, you may need to update RubyGems (using sudo only if necessary):

If you still have issues, you can download and install new Command LineTools (such as gcc) using the command

which may allow you to install native gems using this command (again usingsudo only if necessary):

Note that upgrading Mac OS X does not automatically upgrade Xcode itself(that can be done separately via the App Store), and having an out-of-dateXcode.app can interfere with the command line tools downloaded above. Ifyou run into this issue, upgrade Xcode and install the upgraded CommandLine Tools.

Jekyll & Mac OS X 10.11

With the introduction of System Integrity Protection, several directoriesthat were previously writable are now considered system locations and are nolonger available. Given these changes, there are a couple of simple ways to getup and running. One option is to change the location where the gem will beinstalled (again using sudo only if necessary):

Alternatively, Homebrew can be installed and used to set up Ruby. This can bedone as follows:

Once Homebrew is installed, the second step is easy:

Advanced users (with more complex needs) may find it helpful to choose one of anumber of Ruby version managers (RVM, rbenv, chruby, etc.) inwhich to install Jekyll.

Jackyl Band

If you elect to use one of the above methods to install Ruby, it might benecessary to modify your $PATH variable using the following command:

Jekyll & Hyde (itch) Mac Os Update

GUI apps can modify the $PATH as follows:

Either of these approaches are useful because /usr/local is considered a'safe' location on systems which have SIP enabled, they avoid potentialconflicts with the version of Ruby included by Apple, and it keeps Jekyll andits dependencies in a sandboxed environment. This also has the addedbenefit of not requiring sudo when you want to add or remove a gem.

Could not find a JavaScript runtime. (ExecJS::RuntimeUnavailable)

This error can occur during the installation of jekyll-coffeescript whenyou don't have a proper JavaScript runtime. To solve this, either installexecjs and therubyracer gems, or install nodejs. Check outissue #2327 for more info.

Problems running Jekyll

On Debian or Ubuntu, you may need to add /var/lib/gems/1.8/bin/ to your pathin order to have the jekyll executable be available in your Terminal.

While Windows is not an officially-supported platform, it can be used to runJekyll with the proper tweaks. This page aims to collect some of the generalknowledge and lessons that have been unearthed by Windows users.

Installation

Julian Thilo has written up instructions to getJekyll running on Windows and it seems to work for most.The instructions were written for Ruby 2.0.0, but should work for later versionsprior to 2.2.

Alternatively David Burela has written instructions on how to install Jekyll via Chocolately with 3 command prompt entries

Encoding

If you use UTF-8 encoding, make sure that no BOM headercharacters exist in your files or very, very bad things will happen toJekyll. This is especially relevant if you're running Jekyll on Windows.

Additionally, you might need to change the code page of the console window to UTF-8in case you get a 'Liquid Exception: Incompatible character encoding' error duringthe site generation process. It can be done with the following command:

Auto-regeneration

As of v1.3.0, Jekyll uses the listen gem to watch for changes when the--watch switch is specified during a build or serve. While listen hasbuilt-in support for UNIX systems, it requires an extra gem for compatibilitywith Windows. Add the following to the Gemfile for your site:





broken image